Customization: | Available |
---|---|
After-sales Service: | Local Network |
Warranty: | One Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Genset Specification | |
Model | CM60R7N |
Diesel engine model | CMR6105NIZ |
Alternator model | Henjo |
Control panel | Smartgen |
Rated power (kW) | 60 |
Rated voltage (V) | 400 |
Rated frequency (Hz) | 50/60 |
Power factor | 0.8 |
Connection mode | Three-phase four-wire, star connection |
Protection class | IP23 |
Insulation class | H |
Voltage steady-state adjusting rate (%) | ±2.5 |
Voltage transient-state adjusting rate (%) | -15~+20 |
Voltage stable time (S) | 1.5 |
Voltage fluctuation rate (%) | 0.5 |
Voltage regulation range (%) | 95-105 |
Frequency steady-state adjusting rate (%) | 5 |
Frequency transient-state adjusting rate (%) | ±10 |
Frequency stable time (S) | 7 |
Frequency fluctuation rate (%) | 0.5 |
Dimension L*B*H (mm) | 2200x900x1400 |
Net weight (Kg) | 1250 |
Natural Gas Engine Specification | |
Model | CMR6105NIZ |
Rated power (kW) | 75 |
Speed (rpm) | 1500 |
Idle speed (rpm) | 700 |
Type | Four-stroke, turbocharged, inlet air cooling, spark ignition,external-mixing electronic control |
No. and layout of cylinders | 6 in line |
Cylinder bore (mm) | 105 |
Piston stroke (mm) | 135 |
Displacement (L) | 7.01 |
Compression ratio | 10.5:1 |
Heat consumption (kj/kWh) | ≤9500 |
Oil consumption (g/kWh) | ≤1.0 |
Exhaust temp before turbine (ºC) | ≤650 |
Water temperature (ºC) | ≤85 |
Oil temperature (ºC) | ≤90 |
Lubricating | Press and spray lubrication |
Cooling method | Pressurized water cooling |
Start mode | Air motor or electric motor |