130kw Continuous Output Biogas Power Generator

Product Details
Customization: Available
After-sales Service: Local Network
Warranty: One Year
Manufacturer/Factory
Diamond Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
10000000 RMB
Plant Area
501~1000 square meters
  • 130kw Continuous Output Biogas Power Generator
  • 130kw Continuous Output Biogas Power Generator
  • 130kw Continuous Output Biogas Power Generator
  • 130kw Continuous Output Biogas Power Generator
  • 130kw Continuous Output Biogas Power Generator
  • 130kw Continuous Output Biogas Power Generator
Find Similar Products

Basic Info.

Model NO.
CM130R10B
Gas Source
Biogas
Certification
CE
Power
130kw
Standard
Standard
Biogas Engine Model
Sinotruk T10
Alternator Model
Henjo
Rated Volt
400V/230V
Rated Frequency
50/60Hz
Power Factor
0.8
Rated Speed
1500rpm/1800rpm
No. of Cylinders
6
Cylinder Bore
126mm
Piston Stroke
130mm
Displacement
9.726L
Exhaust Temp Before Turbo
Less Than 650ºC
Lubricating Type
Press and Spray Lubrication
Cooling Type
Water Cooling
Start Type
Motor Start
Compression Ratio
11:1
Transport Package
Wooden Box
Trademark
CUSUNMACH
Origin
China
HS Code
85022000
Production Capacity
3000 Sets Per Year

Product Description

1. Main structure of the biogas generator set

Biogas generator sets include biogas-fueled reciprocating internal combustion engines, alternators, electrical parts, control devices, cooling systems, lubrication systems, exhaust systems, fuel systems, and auxiliary equipment. Except for the exhaust pipe and silencer of the exhaust system, they are mounted on a steel chassis. The generator set is a fixed permanent installed generator set. The steel underframe is mounted to the concrete foundation.


2. Main structure of the biogas engine

T10 high-tech biogas engine is the national 863 program project production. It is a domestic leading level natural gas engines with new generation of electricity, rare field combustion and four valves. Based on STEYR technology the engine is designed and developed by SINOTRUK with the EControls company and has complete intellectual property rights. It has the characteristics of low gas consumption, low exhaust temperature, good reliability and low maintenance cost.

3. 
Technical characteristics of gas engine

Inherit high strength double-wall enhanced wide body, frame crankcase structure of STEYR engine, significantly improve the reliability and durability of the engine. Four valve structure design effectively improve the charging efficiency. The spark plug effectively improve the flame propagation speed, and EControls new generation of CFV ensures continuous and accurate gas supply, lean combustion mode makes the combustion more sufficient.


130kw Continuous Output Biogas Power Generator


4. Alternator

The brushless constant-voltage synchronous alternators are of the self-excited type with an electronic voltage regulator integrated in the excitation system. They are used as main or standby units in land based power installations and for ships' electrical systems and can be driven by internal combustion engines or gas, steam and water turbines and electric motors.

Structure: 
The alternator comprises the main machine exciter and excitation system. The main machine is of revolving magnetic field with cylindrical rotor and damper winding. The exciter is revolving armature machine. The exciter power is supplied to the rotor of the main machine via rotating rectifiers.

130kw Continuous Output Biogas Power Generator

5. Genset control panel


The control panel adopted Harsen controller and can detect the current, voltage, speed, frequency, power, engine cooling water temperature, engine oil pressure, exhaust temperature, number of starts, running time, etc. of the unit. The screen also designed a variety of necessary protections for the generator set to ensure safe and stable operation of the unit. The main protections include high water temperature, low oil pressure, overspeed, high temperature, over voltage, under voltage and low frequency. The control panel provides DC power switch, emergency stop button, and unit fault alarm indication.

The automatic generator set adopts automatic control system, which can realize self-starting, self-regulating, self-adjusting frequency, automatic load-carrying, automatic fault alarm, automatic control, etc., to achieve digital management, the generator is always ready to start, the main power supply is cut off or When the fault occurs, the standby unit starts immediately and is put into the load operation at 15S. The unit is interlocked with the external power. The automatic switching between the mains and the standby unit is realized through the ATS of the Party A. When the utility power is restored, the standby unit exits and enters the shutdown process. When the startup is unsuccessful for 3 consecutive times, it can issue a startup failure alarm, and automatically stop when the unit fails, and provide alarm signal information.

130kw Continuous Output Biogas Power Generator



6. Parameter table
 
CM130R10B biogas generator set
Genset model CM130R10B
Engine model Sinotruk T10
Alternator model Henjo or equivalent
Controller DEIF
Max power 150kw
Continuous output 130kw
Rated voltage 400V
Power factor 0.8 (lagging)
Rated frequency 50Hz
Rated speed 1500rpm
Steady state voltage regulation rate ≤±2.5%
Stabilization time 1.5s
Transient state voltage regulation rate ≤ ±20%
Fluctuation rate ≤±0.5%
Steady state frequency regulation rate ≤0-5% (adjustable)
Stabilization time 5s
Transient state frequency regulation rate ≤±10%
Fluctuation rate ≤±0.5%
Starting method 24V DC start
Voltage regulating method AVR (Automatic voltage regulation)
Speed governing method Electronic governor
Ignition system Digital ignition system
Cooling mehtod Forced water cooling with multi-fans radiator
Coupling method Flexible coupling
Reference dimension  2800x1200x1505mm 
Reference weight 2000kg 
Parameters of biogas engine
Model Sinotruk T10
Engine type Four strokes, spark plug ignited, water cooled, turbocharged and inter-cooled
Cylinder arrangement 6 in line
Bore 126mm
Stroke  130mm
Displacement 9.726L
Rated speed 1500rpm
Compression ratio 11:1
Design combustion type Lean combustion
Air to fuel gas ratio <1.5
Flywheel teeth number 136
Minimum temp of engine coolant 71ºC
Maximum temp of engine coolant 86ºC
Maximum exhaust back pressure 83 mbar
Fuel gas to oil ratio ≤0.18
Oil capacity 24L
Temp of exhaust gas <580ºC
Cooling method Forced water cooling, multi-fans radiator
Lubricating method Pressure and splashing lubricating
Ignition method Spark plug ignition
Starting method 24V DC start
Rotating direction Counterclockwise (flywheel view)
Output method Flywheel output
Parameter of alternator
Model Henjo 
Rated capacity 187.5kva
Rated voltage 400V
Rated frequency 50Hz
Power factor 0.8 (lagging)
Rated speed 1500rpm
Protection class IP23
Insulation class H
Phases and connection 3 phases and 4 wires
Exciting method Brushless
Voltage regulating method AVR automation

130kw Continuous Output Biogas Power Generator130kw Continuous Output Biogas Power Generator130kw Continuous Output Biogas Power Generator

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier